Virtual Poster Session

Welcome to the Virtual Poster Session, a new and powerful tool for networking and information exchange. Here you can share your work, search though the poster library, and start a dialogue with others in your field. Each uploaded poster that pertains to force measurement and testing can currently be used to apply for an academic travel scholarship; please see the Scholarships page for application details and deadlines.

Sort By: Most Recent | Most Popular View All
Name: cbutowicz

The purpose of this study was to determine differences in core stability between collegiate football players with and without non-traumatic shoulder pain. 20 collegiate football players completed tests of trunk control and muscle capacity. Control was assessed via an unstable chair placed on a force plate. Static control was assessed by center of pressure movement during seated balance using 95% confidence ellipse area (CEA; mm2) and mean velocity (MVEL; mm/s). Dynamic control was assessed during a speed and accuracy target acquisition task. Directional control (DC; mm; COP path to target) and precision control (movement around target prior to acquisition (PC; CEA mm2)) were measured. Capacity was assessed by trunk flexor (FLEX; s) and extensor endurance (EXT; s) and double-leg lowering (DLL; °). MANOVA (Eta) and t-tests (Cohen’s d) assessed group differences (p < 0.05) Core stability was not significantly different between groups. Data presented as mean ± stdev (No Pain/Pain), p-value, effect size: Static control- CEA 183 ± 129/ 131 ± 85 and MVEL 5.7 ± 3.0/6.4 ± 2.6, p = 0.38, Eta =.33; Dynamic Control- DC 49± 9/46 ± 6, p = 0.49, d =.39 and PC 143 ± 72/93± 25, p = 0.051, d = 0.93; Capacity: FLEX 77 ± 38/99 ± 32, EXT 74 ± 22/69± 28, p = 0.22, Eta= .40 and DLLT 14 ± 10/15 ± 11, p = 0.92, d =.05. Our data do not provide evidence of diminished core stability in football players with shoulder pain.


Name: Jrfoster

A period of incoordination and fatigue is commonly associated with the transition run in triathletes, in which running mechanics are thought to be altered. Few studies have examined the changes in ground reaction forces and vertical loading rate during the transition run. Our purpose was to assess the changes that occur in ground reaction forces during a fatigued transition run in triathletes. 13 recreational male triathletes (34 ± 4.2 years) performed an incremental cycling test and a cycle to run transition on separate testing sessions. A 15-camera Vicon motion capture system collecting at 200 Hz and an AMTI force instrumented treadmill collecting at 2000 Hz were used in conjunction with a modified Plug-In Gait marker to collect trajectory and analog data for pre and post-cycling running trials. Ground reaction forces and temporal spatial parameters were assessed during stance of all running trials using Visual 3D software. Peak vertical ground reaction force and step length decreased significantly from pre-cycling to immediate post-cycling measures (p=.003, p<.001), no difference existed for either variable for pre-cycling vs. 10min post-cycling. Instantaneous peak vertical loading rate (IVLR) and step rate increased significantly from pre-cycling to immediate post-cycling measures (p=.05, p<.001), no difference existed for stride rate for pre-cycling vs. 10min post-cycling. IVLR remained significantly increased at the 10 min post-cyling (p=.035). The study findings suggest that fatigue from prolonged cycling can negatively impact triathletes’ ability to attenuate ground reaction forces in subsequent running.


Name: jessef32

While the popularity of triathlon is increasing, the underlying biomechanics of the various bicycling positions and saddle types are not yet understood.

PURPOSE: To determine how bicycle rider position and saddle type (road vs. triathlon) affect the bicycle-rider interface forces (BRIFs) at a standardized power and cadence. METHODS: A stationary cycling ergometer was modified to include force transducers at the saddle, bottom bracket, and stem. Anatomical measurements were made in order to fine-tune rider fit on the ergometer. 9 subjects completed riding trials in all combinations of road position, road saddle, triathlon position, and triathlon saddle. Riding trials were 6 minutes, at a standardized power output of 2 Watts per kilogram (W/kg) and 90 Revolutions per Minute (RPM). RESULTS: Analysis was broken into three categories: Road Saddle, Road Position (RR) vs. Triathlon Saddle, Road Position (TR), Road Saddle, Triathlon Position (RT) vs. Triathlon Saddle, Triathlon Position (TT), and Road Saddle, Road Position vs. Triathlon Saddle, Triathlon Position. Surprisingly, there were no significant differences in saddle vertical forces between either body positions or saddle type. However, there were significant differences at the handlebar; 8.4% more body weight supported at the handlebar in the triathlon position compared to the road position while using a triathlon saddle. CONCLUSION: Across cycling positions, there is a significant change in saddle and stem vertical forces. However, within a cycling position, saddle type does not change the amount of vertical force seen at the saddle.


Name: bthakkar

INTRODUCTION
Running-related injuries are most often single-sided and are partially attributed to lower limb movement and loading asymmetries. For example, runners with tibial stress fractures demonstrate asymmetry in loading rate. Running is a dynamic athletic event in which runners often engage in both inclined and declined running with the goal of improving conditioning. Symmetry Angle (SA) is a commonly used, robust measure of determining symmetry. The purpose of this study was to compare peak vertical ground reaction force (VGRF) symmetry using the SA during uphill, level and downhill running on an instrumented treadmill.
METHODS
Eleven healthy adults volunteered to participate in this study and running at 2.7 m/s at grades of 0°, 5.74° incline and 5.74° decline were analyzed. SA was computed using the peak VGRF values from both the limbs.
RESULTS AND DISCUSSION
No statistically significant differences in SA were observed between the three running conditions. (p=0.61) The unexpected uniformity in vertical GRF across uphill, level, and downhill running is consistent with the absence of changes in the peak magnitudes of the GRF observed previously. This suggests that neither moderate uphill or downhill running result in increases in peak GRF that may be considered injurious.
CONCLUSIONS
This was the first study that looked at kinetic symmetry using peak GRF in healthy recreational runners during the three running conditions. This study suggested that uphill and downhill running does not contribute to potential differences in interlimb symmetry and could be considered as a safe alternative to level running on a treadmill.


Listed In: Biomechanics, Gait
Name: rgoel

Sensorimotor changes such as postural and gait instabilities can affect the functional performance of astronauts after gravitational transitions. When astronauts are trained before flight with supra-threshold noisy, stochastic vestibular stimulation (SVS), the central nervous system can be trained to reweight sensory information by using veridical information from other sensory inputs (such as vision and proprioception) for postural and gait control. This reweighting, in turn, can enhance functional performance in novel gravitational environments. However, the optimal maximum amplitude of stimulation has not yet been identified that can simulate the effect of deterioration in vestibular inputs for preflight training or for evaluating vestibular contribution in functional tests in general. Most studies have used arbitrary but fixed maximum current amplitudes from 3 to 5 mA in the mediolateral (ML) direction to disrupt balance function in both ML and anterior-posterior directions in healthy adults. The goal of this study was to determine the minimum SVS level that yields an equivalently degraded balance performance. Fourteen subjects stood on a compliant surface with their eyes closed and were instructed to maintain a stable upright stance. Measures of stability of the head, trunk, and whole body were quantified in the ML direction. Objective perceptual motion thresholds were estimated ahead of time by having subjects sit on a chair with their eyes closed and giving 1-Hz bipolar binaural sinusoidal electrical stimulation at various current amplitudes. Results from the balance task suggest that using stimulation amplitudes of 280% of motion-perceptual threshold (~2.2 mA on average) significantly degraded balance performance.


Name: sfray9292

The purpose of this study was to quantify adaptation to a new prosthesis in terms of mechanical work profiles. Currently, there is a lack of knowledge on how individuals adapt to a new prosthesis, with many studies investigating different prosthetic feet but not adaptation over time. Thus, there is a need for objective measures to quantify the process of adaptation. Mechanical power and work profiles are a prime subject for modern energy-storage-and-return type prostheses, as the amount of energy a prosthesis stores and returns (i.e., positive and negative work) during stance is directly related to how a user loads and unloads the limb. 22 individuals with unilateral, transtibial amputation were given a new prosthesis at their current mobility level (K3 or above) and wore it for a three-week adaptation period. Kinematic and kinetic measures were recorded from walking on overground force plates at 0, 1.5, and 3 weeks into the adaptation period. Positive and negative work done by the prosthesis and intact ankle-foot was calculated using a unified deformable segment model. Positive work from the prosthesis side increased by 6.1% and intact side by 5.7% after 3 weeks (p = .041, .036). No significant changes were seen in negative power from prosthesis or intact side (p = .115, .192). Analyzing work done by a prosthesis may be desirable for tracking a patient’s gait rehabilitation over time. Future work may analyze how mechanical work profiles relate to more traditional clinical measures.


Name: bryappie

Footwear plays a significant role in, and can influence children’s gait. Footwear type is especially important as a child grows and develops from a novice to an expert walker. Compared to barefoot walking, children generally have increased spatiotemporal (ST) gait parameters while walking with footwear. Gait variability has also shown to be affected by footwear. The degree of stiffness in footwear could have a large influence on children’s gait and variability. This study investigated effects of footwear stiffness on ST gait parameters and gait variability in novice walkers. Children with an average age of 33.3 ( 7.0) months participated in a single data collection. Heel and toe marker positions were acquired for one minute of walking per condition. Participants walked on the treadmill in three levels of footwear stiffness (rigid: hard-soled stiff shoe, semi-rigid: EVA sole athletic shoe, compliant: moccasin soft-sole shoe) and barefoot. ST gait parameters and gait variability were calculated for each condition using marker. and treadmill forces. ST parameters all increased in the rigid and semi-rigid footwear conditions compared to soft-sole and barefoot. Interestingly, there were no differences between barefoot and wearing a moccasin for any of the ST variables. There were no differences in SD and COV between any of the footwear conditions. The moccasin shoe promotes walking most similar to normal barefoot walking. Standard measures of variability failed to detect differences between footwear conditions. Further investigation into different measurements is necessary to parse out what effect footwear has on children’s gait variability.


Listed In: Biomechanics, Gait
Name: kbsmale

Since OpenSim uses motion capture data as input while solving inverse kinematic (IK), it is subjected to soft tissue artifact (STA) as the commonly used surface markers do not correctly represent the underlying rigid bones. The purpose of this study was to determine the effect of applying bone pin (BP) marker defined ranges of knee motion in OpenSim IK solutions. Participants completed successful jump lunges where they were asked to stand on their non-test limb and jump forward onto a force plate (AMTI OR 6-7-OP), land on their test limb and maintain balance for two seconds. Data were processed through OpenSim with generic knee joint constraints as well as constraints derived from BP kinematic data.

BP constrained results yielded a significantly more flexed, adducted and externally rotated knee. Significant differences were also observed for anterior/ posterior and distraction/ compression translations throughout the entire jump lunge while medial/lateral translations were only significant pre and 50 ms post contact. After contact, BP constraints produced a significantly greater flexor, abductor, and external rotator moment. With respect to translation forces, the BP solutions produced smaller posterior shear and greater medial shear and compressive forces at the knee joint.

Generic models available in the OpenSim repository contain knee joint ranges that are not physiologically realistic. Therefore, caution should be expressed when using the results from musculoskeletal modelling as STA and optimizations can introduce error in both the kinematics and kinetic solutions. This error is amplified during ballistic and high impact tasks such as jump landing.


Name: danialkia

As a treatment for end-stage elbow joint arthritis, total elbow replacement (TER) results in joint motions similar to the intact joint; however, bearing wear, excessive deformations and/or early fracture may necessitate early revision of failed implant components.
A finite element model of a TER assembly was developed based on measurements from a Coonrad-Morrey implant (Zimmer, Inc., Warsaw, IN) using nonlinear elasto-plastic UHMWPE material properties and a frictional penalty contact formulation. The loading scenario applied to the model includes a flexion-extension motion, a joint force reaction with variable magnitude and direction and a time varying varus-valgus (VV) moment with a maximum magnitude of 13 N.m, simulating a chair-rise scenario as an extreme loading condition. Model results were compared directly with corresponding experimental data. Experimental wear tests were performed on the abovementioned implants using a VIVO (AMTI, Watertown, MA) six degree-of-freedom (6-DOF) joint motion simulator apparatus. The worn TER bushings were scanned after the test using micro computed tomography (μCT) imaging techniques, and reconstructed as 3D models.
Contact pressure distributions on the humeral and ulnar bushings correlate with the sites of damage as represented by the μCT data and gross observation of clinical retrievals. The results demonstrate UHMWPE bushing damage due to different loading protocols. Numerical results demonstrate strong agreement with experimental data based on the location of deformation and creep on bushings and exhibit promising capabilities for predicting the damage and failure mechanisms of TER implants.


Name: paigelin7

While normalization of gait is a primary goal of early rehabilitation, between limb asymmetries in knee extensor moment can persist 6-24 months later and previous literature assessing gait interventions is limited. The purpose of this study was to assess the influence of subject-specific cadence gait training program on knee loading mechanics following ACLr. Nine individuals completed an 8-week cadence training program (20min, 3x/week; Table1) and nine sex- and surgery-matched individuals served as controls. All eighteen participants received standard physical therapy and were tested at 1 and 3 months post-op. Kinematic and kinetic data were collected during walking at a self-selected speed. Repeated measures ANOVAs were used for comparisons; significance α≤0.05. Main effects of limb and time were observed: knee ROM (kROM;p<0.001;p=0.044;Fig.1) and knee extensor moment (kEXT;p=0.003;p=0.002) in the cadence and control groups, respectively. No main effects of group for kROM (p=0.136) or kEXT (p=0.229) were found. A trend toward a significant group x time x limb interaction was observed in kEXT (p=0.092), but not kROM (p=0.412). Post-hoc analyses of kEXT (Fig.2) revealed a significant time x limb interaction for the cadence group (p=0.053) but not the control group (p=0.884). In the cadence group, the time x limb interaction was driven by a 131% increase in kEXT in the surgical limb versus a 42% increase in the non-surgical limb between T1 and T2. Consistent with previous findings, these pilot data show promising results as the cadence intervention resulted in improvements in sagittal plane knee loading compared to controls.