kneeling

The Effect of Work Boots on Center of Pressure Location at the Knee in Static Kneeling

INTRODUCTION: Workers in industry wear steel toe boots; however, these boots are inflexible and may restrict foot movement. Occupational kneeling is also associated with an increased risk of knee osteoarthritis. Examination of the effects of work boots in kneeling is needed to better understand potential injury risk. Therefore, the purpose of this study was to analyze the center of pressure (COP) at the knee during kneeling when shod and barefoot. METHODS: Fifteen, young, healthy males completed five 10-second static kneeling trials in each condition. Lower body kinematics were obtained using the Optotrak system (Certus and 3020, NDI, Waterloo, ON, CA). Force data were measured from a force plate under the knee of the dominant leg (OR6-7, AMTI, Watertown, MA, USA). The mean COP location was determined with respect to the medial tibial plateau (normalized to tibial width) and the tibial tuberosity (normalized to tibial length) for the medial/lateral and longitudinal directions, respectively. RESULTS: COP was located more medially in the shod condition (34% (±10.6%) tibial width) compared to the barefoot condition (40% (±11.9%) tibial width) (p=0.0485). COP was located above the tibial tuberosity, with no difference between conditions (shod 11% (±3.2%) tibial length, barefoot: (7%) (±8.8%) tibial length) (p=0.97). DISCUSSION: There is a difference in COP location in shod compared to barefoot kneeling. A COP location farther from the joint center of rotation, as occurred in the frontal plane of the shod condition, would increase the moment arm of the ground reaction force and thus the moment at the knee.
Listed In: Biomechanics